top of page
BENDICROP Series for Punching, Shearing, Notching, and Bending

BENDICROP Series for Punching, Shearing, Notching, and Bending

Bendicrop Series is Geka Ironworkers´ range of punching, shearing and bending machines. They can be used by one or two operators simultaneously. This feature available in Bendicrop 60 and 85 is a great advantage over other ironworker machines since having the ability to perform two tasks at the same time increases exponentially the productivity of those machines. The Bendidrop is the only ironworker with an integrated Bending station. It complies with CE regulation on Bending machines.

 

The Bendicrop series has 6 different workstations that can carry out the following ironworking tasks: Punching, Notching, Shearing Flat Bars, Angle Cutting, Bars Shearing and built-in Bending Station.

 

Bendicrop features

All Bendicrop series machines have the following features:

  • Anti-torsion system for shearing flat bars without distortion
  • Bending station
  • Angle section cutting at 45º
  • Can shear in angles in round and square bars
  • Goose neck die-holder that can punch UPN and IPN profiles on legs and webs
  • Touch and cut length stop
FEATURES BENDICROP 50 BENDICROP 60 BENDICROP 85
PUNCHING
Punching Power 50 Ton 60 Ton 80 Ton
Maximum Capacity (A) Ø 31 x 12 mm
(B) Ø 27 x 13 mm
Ø 40 x 11 mm Ø 40 x 15 mm
Throat Depth S / SD 177 mm 250 / 500 mm 300 / 500 mm
Working Height 973 mm 1106 mm 1094 mm
FLAT BARS SHEARING
Flatbar with slight deformation 350 x 10 mm
(5º) 350 x 15 mm
350 x 15 mm
(5º) 350×15 mm
450 x 15 mm
(5º) 450×18 mm
Length of Blades 356 mm 356 mm 475 mm
Shear of one angle leg at 45º 70 mm 70 mm
Working Height 810 mm 859 mm 868 mm
ANGLES AND BARS CUTTING
L at 90º 80 x 80 x 8 mm 120 x 120 x 10 mm 120 x 120 x 10 mm
Round Bar 35 mm 45 mm 45 mm
Square Bar 30 mm 40 mm 40 mm
NOTCHING  Rectangular Triangular Triangular
Plate Thickness 10 mm 10 mm 12 mm
L of 100 mm 100 mm 130 mm
Depth 90 mm
Width 42 mm
BENDING STATION
Maximum Capacity 100 x 10 mm 150 x 10 mm 200 x 12 mm
GENERAL SPECIFICATIONS
Motor Power 3 kW 5,5 kW 9 kW
Strokes per minute 34
on 15 mm stroke
32
on 15 mm stroke
40
on 20 mm stroke
Maximun stroke 15 mm 20 mm 20 mm
bottom of page